ビュイックエンクレーブに駐車センサーを取り付ける方法は?

Modern cars all come with an astounding amount of options, but, because of your budget or the year of your Buick Enclave, you may not be lucky enough to have them all. In this article we’re gonna help you resolve this issue by showing how to install parking sensor on my Buick Enclave? Indeed, this option is highly practical, particularly if you live in the city and have to park your car often in narrow parking places. To help you out, we’ll first check out how parking sensors work, then we’ll take a look at how to install a parking reverse sensor on a Buick Enclave、そして最後に、駐車センサーの価格はいくらですか?

How does parking sensors work on an Buick Enclave?

So we start with the functioning of a parking sensor. As we told you in the intro, this particularl interesting option will allow you to know the distance between the back of your Buick Enclave and an obstacle when you move back. It is therefore extremely logical for people who have to maneuver on a regular basis, whose visibility is poor, or whose vehicle size is large.

Often fitted as standard, the reverse sensors of a Buick Enclave incorporate a kit of sensors (minimum 4) that will be activated with reverse gear and will locate obstacles in the vicinity. The technology used is 超音波, which will send a signal that will bounce off the obstacle and be returned to the sensor. A computer will evaluate the duration of this journey and calculate the distance between the obstacle and the radar. In general you will have a sound signal in the cabin which will increase in level with the proximity of the obstacle and in some cases a visual indicator in complement. The reversing radars of a Buick Enclave will help you for 駐車場だけでなく、セキュリティと歩行者から遠ざけるためでもあります.

Weiterlesen:

Buick Enclave のジャッキはどこにありますか?

How to install parking sensors on a Buick Enclave?

We now move on to the step that you are quite likely most intrigued by, installing reverse parking sensors on a Buick Enclave. この部品は、標準のリザーブセンサーがセットアップされていないにもかかわらず、このテクノロジーを利用したい場合、または壊れたセンサーを交換する必要がある場合に適しています。あなたは運が良い、 it is possible to buy aftermarket parking sensors to install yourself on your Buick Enclave.

How to change a broken backup sensors on a Buick Enclave

まず、方法を見ていきます change a broken parking sensor on an Buick Enclave. If your Buick Enclave has suffered a rear shock and one of the sensors of your reversing radar has been destroyed, it will have to be replaced to let the system to function properly. Thankfully for you this process is very simple, you can even carry it out yourself without any particular mechanical skill:

メーカーのブランド名の交換用レーダーを入手してください。
古いバックアップセンサーをバンパーの後ろから取り外します。
Take out the destroyed parking sensor from your Buick Enclave, this step is extremely intuitive, it is simply clipped on.
新しいセンサーを取り付け直して接続します。
あなたがしなければならないのは、それが正しく動作していることを確認するためにテストすることだけです.
How to install an aftermarket parking sensor kit on an Buick Enclave
Now we advance to the part you’re probably most intrigued by, how to install a reverse sensor set up on a Buick Enclave that doesn’t have one? As we revealed earlier, you’re lucky because a good number of OEMs now deal aftermarket backup radar models. However, the best performing and least fragile models will be models that fit into your bumper. We will look at these types in this section. It is required to have some notions in electricity, and some notions in do-it-yourself to consider the fitting up of the kit. You will certainly have to remove the bumper of your Buick Enclave for the installation, do not hesitate to browse our content on this subject matter to learn the procedure to follow. If you don’t feel like it, you can call a specialist, the process should take him between 1 and 2 hours, and for you around 3 hours.
- You will just need to adhere to the installation instructions, but we summarize here the main steps.
- バンパーの内部にアクセスできない場合は、バンパーを取り出します。
- 付属のドリルベルを使用して、センサーの理想的な配置を検討し、死角を回避して、バンパーに穴を開けます。
- さまざまなセンサーを配置します。
- リバースライトを含むヘッドランプユニットにケーブルを配線します。
- ワイヤから電流を取得して、パーキングセンサーをこれに接続します。
- すべて試してみてください。
  
  Install a parking sensor without drilling on a Buick Enclave
  そして最後に、私たちは今あなたを紹介します the installation of a drill-free parking sensors system on a Buick Enclave. There are two options, the ultrasounds more fragile because subjected to the shocks, and the electromagnetics which stick behind the bumper and which are thus protected, it does not affect your bumper and will thus be easy to take off. This type of radar sticks on the bumper. The installation of these types of sensors will be similar.
  - ある程度の電気知識があればアクセスできるインストールガイドブックに従ってください。
  - Identify the ideal sensor location, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different spots of the ultrasonic sensors.
  - それらを一緒に接着し、付属のボックスを使用して接続します。
  - すべてをテストします。
    What’s the price of parking sensors for a Buick Enclave?
    Price of changing a broken reversing parking sensor for an Buick Enclave
    破壊された後退レーダーの交換はモデルによって異なりますが、価格は次のように変動します。 センサーあたり 10 および 30 ユーロ. 専門家によるキットのインストールには、約 XNUMX ユーロを計算することが不可欠です。
    Price of an ultrasonic parking sensors with drilling for Buick Enclave
    穴のあるモデルには多くのキットとさまざまなブランドがありますが、数える必要があります 50 euros for a good quality kit.
    Price of a parking sensors kit without drilling for a Buick Enclave
    .
    最後に、 price of a reversing radar without drilling for your Buick Enclave, no matter what type you choose, you will have to pay among 30および60ユーロ.
    ビュイックエンクレーブに関するその他のガイドが必要な場合は、ビュイックエンクレーブカテゴリにアクセスしてください。