Рейтинг статьи
1 звезда2 звезды3 звезды4 звезды5 звезд

ビュイック ルツェルンに駐車センサーをインストールする方法?

Recent cars all come with an astounding number of features, however, resulting from your budget or the year of your Buick Lucerne, you may not be lucky enough to have them all. Today we’re going to help you solve this problem by detailing how to install parking sensor on my Buick Lucerne? In reality, this option is very practical, especially if you live in the city and have to park often in narrow parking areas. To help you out, we’ll first check out how parking sensors function, then we’ll look at how to install a parking reverse sensor on a Buick Lucerne、そして最後に、駐車センサーの価格はいくらですか?

How does parking sensors function on an Buick Lucerne?

So we commence with the functioning of a parking sensor. As we revealed to you in the intro, this particularl interesting option permits you to know the distance between the back of your Buick Lucerne and an obstacle when you maneuver. It is therefore particularly good for drivers who have to maneuver often, whose field of vision is poor, or whose car size is large.

Often times installed as standard, the reverse sensors of a Buick Lucerne integrate a set of sensors (minimum 4) that will be activated with reverse gear and will sense obstacles in the vicinity. The technology used is 超音波, which will send a signal that will bounce off the obstacle and be sent back to the sensor. A computer will analyze the duration of this journey and calculate the distance between the obstacle and the radar. In most cases you will have a sound warning in the cabin which will increase in level with the closeness of the obstacle and sometimes a visual marker in complement. The reversing radars of a Buick Lucerne will help you for 駐車だけでなく、セキュリティと歩行者の回避のためにも.

ビュイック ルツェルンのエンジンが揺れます。どうすればいいですか?

How to install parking sensors on a Buick Lucerne?

We now move on to the section that you are most likely most intrigued by, fitting reverse parking sensors on a Buick Lucerne. This part is for you if you don’t have a standard reserve sensor set up and you still want to benefit of this technology, or if you have to replace a broken one. You are lucky, it is possible to buy auto aftermarket parking sensors to install yourself on your Buick Lucerne.

How to replace a broken backup sensors on a Buick Lucerne

まず、方法を見ていきます replace a broken parking sensor on an Buick Lucerne. If it turns out your Buick Lucerne has suffered a rear collision and one of the sensors of your reversing radar has been destroyed, it will have to be swapped out to allow the system to function properly. Good thing for you this procedure is particularly simple, you can even carry it out yourself without any specified mechanical skill:

  • メーカーのブランド名の交換用ユニット レーダーを入手してください。
  • 古いバックアップ センサーをバンパーの後ろから外します。
  • Take out the damaged parking sensor from your Buick Lucerne, this part is very intuitive, it is only clipped on.
  • 新しいセンサーを取り付けて接続します。
  • あなたがしなければならないことは、それが正しく機能していることを確認するためにそれをテストすることだけです.

    How to install an aftermarket parking sensor kit on an Buick Lucerne

    Now we go forward to the part you’re most certainly most intrigued by, how to install a reverse sensor set up on a Buick Lucerne that doesn’t have one? As we explained above, you’re lucky because many of OEMs now offer auto aftermarket backup radar models. But, the best performing and least fragile models will be models that fit into your bumper. We will concentrate on these types in this section. It is required to have some notions in electricity, and some notions in do-it-yourself to consider the installation of the kit. You will surely have to remove the bumper of your Buick Lucerne for the installation, do not hesitate to browse our article on this subject matter to discover the process to follow. If you don’t feel like it, you can call a mechanic, the operation should take him between 1 and 2 hours, and for you around 3 hours.

    • You will simply need to stick to the installation instructions, but we summarize here the main simple steps.
    • バンパーの内部にアクセスできない場合は、バンパーを取り出します。
    • 死角を避けるためにセンサーの最適な位置を考え、付属のドリル ベルを使用してバンパーに穴を開けます。
    • さまざまなセンサーを配置します。
    • リバース ライトを含むヘッドランプ ユニットにケーブルを配線します。
    • ワイヤから電流を取得して、パーキング センサーをこれに接続します。
    • それをすべて試してみてください。

      Install a parking sensor without drilling on a Buick Lucerne

      そして最後に、私たちは今あなたを紹介します the installation of a drill-free parking sensors system on a Buick Lucerne. There are two options, the ultrasounds more weak because exposed to the shocks, and the electromagnetics which stick at the rear of the bumper and which are thus protected, it does not harm your bumper and will thus be easy to remove. This type of radar sticks on the bumper. The installation of these types of sensors will be similar.

      • 一部の電気ベースでアクセス可能なインストール手順に従ってください。
      • 電磁反転センサー(粘着テープ)のバンパーの後ろ、または超音波センサーの別の場所のいずれかで、最適なセンサーの位置を見つけます。
      • それらを一緒に接着し、付属のボックスを使用して接続します。
      • すべてをテストします。

        What’s the price of parking sensors for a Buick Lucerne?

        Price of changing a broken reversing parking sensor for an Buick Lucerne

        破壊された後退レーダーの交換はモデルによって異なりますが、価格は次のように変動します。 センサーあたり 10 および 30 ユーロ. メカニックによるキットの取り付けには、約XNUMXユーロが必要です。

        Price of an ultrasonic parking sensors with drilling for Buick Lucerne

        穴のあるモデルには多くのキットとさまざまなブランドがありますが、数を数える必要があります 50 euros for a good quality set up.

        Price of a parking sensors kit without drilling for a Buick Lucerne


        最後に、 price of a reversing radar without drilling for your Buick Lucerne、どのバージョンを選択しても、その間に費やす必要があります 30および60ユーロ.

        ビュイック ルツェルンについてさらに質問がある場合は、いつでもビュイック ルツェルンのカテゴリを参照してください。

ビュイック ルツェルン のブレーキ パッドを交換するにはどうすればよいですか?
Рейтинг статьи
Ссылка на основную публикацию