ビュイック エンビジョンからバンパーを取り外すには?

あなたが少し便利な人なら、あなたはおそらく wanting to take care of the majority of the maintenance to be carried out on your Buick Envision, but some are more difficult than others and need the removal of body parts or elements to access the part you want to focus on. We would like to help you in this task. That’s why in this article we are going to find out how to remove the bumper from a Buick Envision. This procedure is not very difficult and you should be able to do it with few equipment. For that, first we will see how to remove the front bumper of your Buick Envision, then how to remove the rear bumper of this one.

How to remove the front bumper from a Buick Envision

So let’s start our article content with the front bumper of your Buick Envision. To take it off, you will just need a set of ratchet wrenches, some screwdrivers and torx bits. Here are the guidelines you will have to stick to to be able to disassemble the bumper of your Buick Envision in good conditions:

• If you want to be more comfortable, we recommend you to lift your Buick Envision and to remove the front wheels to have a good access to the whole front bumper.
• 車のボンネットを開けて: 当たり前のように思えますが、エンジン コンパートメントのバンパー アタッチメントにアクセスする必要があります。
• Remove the wheel arches: They’re also called fenders, but they’ll 邪魔になり、すべてのネジにアクセスできなくなります on the front bumper of your Buick Envision. Dependant on your car features and the year of your model, you will also be able to find staples, to get this done, you will just have to use a staple extractor or to do it carefully with a big flat screwdriver, and use a lever to open the staple.
• Then you will have to unscrew the screws that is behind your mudguard and that seals the front bumper of your Buick Envision on the sides.
• エンジンベイのバンパーの上部にあるネジを緩めるか、クリップを取り外します。
• Now it’s time to go underneath your Buick Envision to unscrew the bolts that are on the chassis of the car, you will find some バンパーの中央と側面にあります。
• ことを確認してください プレート照明と距離制御センサーの接続を外します あなたがそれを持っているなら。
• 慎重に フロントバンパーを外す 最初に側面のクリップを外します。 外れない場合は、ネジやクリップを忘れている可能性があります。 地面に触れて傷がつくのを防ぐために、カーペットなどを使用することを考えてください。

それだけです。すべての手順を見てきました。 how to remove the front bumper from your Buick Envision、それを再組み立てするには、反対の方法でステップに固執します。

How to remove the rear bumper from a Buick Envision

And now, whether or not the procedure is quite similar, we will look at the case of removing the rear bumper from your Buick Envision. For each step to avoid repeating ourselves we will exclusively give you the broad highlights, read the part 1 if you have any concerns or questions for more information.

• Start with performing the same first step, that is, lift your Buick Envision and remove your rear wheels to be able to have an optimal working area to remove the bumper of your Buick Envision without trouble
• Remove the rear wheel arches of your Buick Envision to access the side bumper side brackets
• トランクを開けて
• Remove the side brackets in your wheel arches to make it more convenient to remove the bumper from your Buick Envision.
• Take off the lower bindings underneath your Buick Envision.
• While doing so, be sure you un plug the rear license plate light and the reverse radar sensors if you are equipped with them.
• トランクの上部から上部ブラケットを緩めます。
• 今あなたがしなければならないすべては remove the rear bumper from your Buick Envision、フロントバンパーと同じテクニックにこだわる

ここでは、これらの XNUMX つの部分を見てきましたが、 how to remove the bumper from a Buick Envision whether it is the front one or the rear one the ways are almost the same and it is enough to be meticulous to make everything go well.

ビュイック エンビジョンのガイドをもっと知りたい場合は、ビュイック エンビジョン カテゴリにアクセスしてください。