ビュイックリーガルに駐車センサーを取り付ける方法は？

Modern cars all come with an impressive amount of technology, nevertheless, due to your budget or the year of your Buick Regal, you may not be sufficiently fortunate to have them all. Today we’re going to help you solve this concern by showing how to install parking sensor on my Buick Regal? In reality, this option is extremely handy, especially if you live in the city and have to park often in narrow parking places. To help you out, we’ll first view how parking sensors function, then we’ll check out how to install a parking reverse sensor on a Buick Regal、そして最後に、駐車センサーの価格はいくらですか?

How does parking sensors work on an Buick Regal?

So we start with the functioning of a parking sensor. As we told you in the intro, this particularl interesting option allows you to know the distance between the back of your Buick Regal and an obstacle when you maneuver. It is as a result especially legitimate for persons who have to maneuver regularly, whose visibility is awful, or whose vehicle size is huge.

Frequently fitted as standard, the reverse sensors of a Buick Regal include a set of sensors (minimum 4) that will be turned on with reverse gear and will detect obstacles in the vicinity. The technology employed is 超音波, which will send a signal that will bounce off the obstacle and be sent back to the sensor. A computer will evaluate the duration of this journey and estimate the distance between the obstacle and the radar. In most cases you will have a sound warning in the cabin which will increase in intensity with the proximity of the obstacle and sometimes a visual marker in complement. The reversing radars of a Buick Regal will help you for 駐車場だけでなく、セキュリティと歩行者から遠ざけるためでもあります.

How to install parking sensors on a Buick Regal?

次に、あなたが最も確実に最も興味を持っているセクションに進みます。 fitting reverse parking sensors on a Buick Regal. This part is for you if you don’t have a standard reserve sensor set up and you still desire to benefit of this technology, or if you have to replace a damaged one. You are lucky, it is possible to buy automotive aftermarket parking sensors to install yourself on your Buick Regal.

How to replace a malfunctioning backup sensors on a Buick Regal

まず、方法を見ていきます replace a malfunctioning parking sensor on an Buick Regal. In the event that your Buick Regal has suffered a rear impact and one of the sensors of your reversing radar has been destroyed, it will have to be replaced to allow the system to function properly. Fortunately for you this process is very simple, you can even make it out yourself without any specified mechanical skill:

• メーカーのブランド名の交換用レーダーを入手してください。
• 古いバックアップ センサーをバンパーの後ろから取り外します。
• Remove the malfunctioned parking sensor from your Buick Regal, this part is fairly intuitive, it is only clipped on.
• 新しいセンサーを取り付けて接続します。
• あなたがしなければならないのは、それが正しく動作していることを確認するためにテストすることだけです.
  

  How to install an aftermarket parking sensor kit on an Buick Regal

  Now we go forward to the part you’re probably most interested in, how to install a reverse sensor set up on a Buick Regal that doesn’t have one? As we explained early on, you’re lucky because many of OEMs now provide automotive aftermarket backup radar models. But, the best performing and least fragile models will be models that fit into your bumper. We will look at these versions in this part. It is required to have some notions in electricity, and some notions in do-it-yourself to contemplate the installation of the kit. You will certainly have to remove the bumper of your Buick Regal for the set up, do not be reluctant to browse our article on this subject to discover the process to follow. If you don’t feel like it, you can call a workshop, the procedure should take him between 1 and 2 hours, and for you around 3 hours.

  • インストール ガイダンスに従うだけで済みますが、主な簡単な手順をここにまとめます。
  • バンパーの内部にアクセスできない場合は、バンパーを取り外します。
  • 付属のドリルベルを使用して、死角を避けるためにセンサーの理想的な位置を検討し、バンパーに穴を開けます。
  • さまざまなセンサーを配置します。
  • リバース ライトを含むヘッドランプ ユニットにケーブルを配線します。
  • ワイヤから電流を取得して、パーキング センサーをこれに接続します。
  • それをすべて試してみてください。
    

    Install a parking sensor without drilling on a Buick Regal

    そして最後に、私たちは今あなたを紹介します the installation of a drill-free parking sensors system on a Buick Regal. There are two types, the ultrasounds more weak because subjected to the shocks, and the electromagnetics which stick at the rear of the bumper and which are thus protected, it does not affect your bumper and will thus be easy to take out. This sort of radar sticks on the bumper. The set up of these types of sensors will be similar.

    • ある程度の電気知識があればアクセスできる設置マニュアルに従ってください。
    • 電磁反転センサー (粘着テープ) のバンパーの後ろ、または超音波センサーのさまざまな場所のいずれかで、理想的なセンサーの位置を特定します。
    • それらを一緒に接着し、付属のボックスを使用して接続します。
    • 試してみてください。
      

      What’s the price of parking sensors for a Buick Regal?

      Price of changing a malfunctioning reversing parking sensor for an Buick Regal

      The replacement of a destroyed reversing radar will rely upon the model, but the price will fluctuate between センサーあたり 10 および 30 ユーロ. ワークショップによるキットのインストールには、約XNUMXユーロを計算する必要があります。

      Price of an ultrasonic parking sensors with drilling for Buick Regal

      穴のあるモデルには多くのキットとさまざまなブランドがありますが、数える必要があります 高級システムで50ユーロ.

      Price of a parking sensors kit without drilling for a Buick Regal

      .

      結論として、 price of a reversing radar without drilling for your Buick Regal、どのバージョンを使用する場合でも、その間に支払う必要があります 30および60ユーロ.

      ビュイック リーガルのチュートリアルがさらに必要な場合は、ビュイック リーガル カテゴリにアクセスしてください。